Рhysico-mechanical properties and structuralphase state of individual coatings based on nitrides W and Сr

Тatyana Hоvоrun; Constantin Dyadyura; Alexander Pylypenko; Valentina Pererva; Sergey Varenik; Dmitry Osichev

doi:10.30977/BUL.2219-5548.2020.88.1.73

Автор(и)

Тatyana Hоvоrun Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine, Ukraine
Constantin Dyadyura Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine, Ukraine
Alexander Pylypenko Department of Electronics, General and Applied Physics, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine, Ukraine
Valentina Pererva Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine, Ukraine
Sergey Varenik Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine, Ukraine
Dmitry Osichev Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine, Ukraine

DOI:

https://doi.org/10.30977/BUL.2219-5548.2020.88.1.73

Ключові слова:

різальний інструмент, зносостійкі покриття, поверхневе зміцнення

Анотація

Анотація. У роботі розглянуті методи отримання зносостійких покриттів на основі нітридів металів W та Cr, охарактеризовані їх переваги та недоліки. Підібрані режими конденсації таких покриттів із різним співвідношенням компонент у магнетронній системі з постійними магнітами. Проведені дослідження мікроструктури та структурно-фазового складу. Досліджено мікротвердість отриманих покриттів та проаналізовані отримані результати.

Біографії авторів

Тatyana Hоvоrun, Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine

Ph.D., Associate Professor

Constantin Dyadyura, Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine

Doct. of Science, Professor

Alexander Pylypenko, Department of Electronics, General and Applied Physics, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine

Assistant Professor

Valentina Pererva, Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine

Master

Sergey Varenik, Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine

Master

Dmitry Osichev, Department of Applied Materials Science and Technology of Structural Materials, Sumy State University, 2, Rimsky-Korsakov, Sumy, 40007, Ukraine

Student

Посилання

Tymofeyeva L. A., Komarova H. L. Pidvyshchennya znosostiykosti rizalʹnykh instrumentiv dlya obrobky zalizovuhletsevykh splaviv. Tekhnolohiya metaliv ta materialoznavstvo: zbirnyk naukovykh pratsʹ UkrDAZT. Harkov, 2014. Vyp. 14 Р. 143−149.

Zatulenko A. S., Zayets S. S. Vplyv protsesu znoshuvannya rizalʹnoho instrumentu na tochnistʹ mekhanichnoyi obrobky. ХII Vseukrayinsʹka naukovo-praktychna konferentsiya studentiv, aspirantiv ta molodykh vchenykh «Pohlyad u maybutnye pryladobuduvannya», 15-16 travnya 2019 r., KPI im. Ihorya Sikorsʹkoho, m. Kyyiv. Р. 152–154.

Chuangwen X. The relationships between cutting parameters, tool wear, cutting force and vibration / X. Chuangwen, D. Jianming, C. Yuzhen, L. Huaiyuan. Advances in Mechanical Engineering. 2018, Vol. 10(1) Р. 100–108. DOI: 10.1177/ 1687814017750434.

Zaulychny Ya. V. Influence of Interatomic Interaction Processes on the Mechanical Properties of Carbide Coatings Based on Ti, V and Cr, Obtained by Diffusion Metallization / Ya. V. Zaulychny, V. G. Hignjak, N. A., Harchenko, Т. P. Hоvоrun et al. J. Nano-еlectron. Phys. 2016. Vol. 8, No 4(1). Р. 04008.

Horbachova T. Yu., Hovorun T. P. Znosostiyki pokryttya dlya rizhuchykh instrumentiv na osnovi Mo, Cr ta N. Suchasni tekhnolohiyi u promyslovomu vyrobnytstvi: materialy naukovo-tekhnichnoyi konferentsiyi fakulʹtetu tekhnichnykh system ta enerhoefektyvnykh tekhnolohiy, 18–21 kvitnya 2017. Chastyna 1. Sumy: SumDU, 2017. Р. 102– 103.

Maksakova O. V. Multilayered ZrN/CrN coatings with enhanced thermal and mechanical properties / O.V. Maksakova, S. Simoẽs, A. D. Pogrebnjak, O. V. Bondar, Y. O. Kravchenko, T. N. Koltunowicz, Z.K. Shaimardanov. J. Alloy. Compd. 2019, Vol. 776, Р. 679–690.

Smetanin R. C., Nadtochiy K. YU., Hovorun T. P. Pidvyshchennya ekspluatatsiynykh vlastyvostey rizhuchoho instrumentu pry nanesenni pokryttiv mahnetronnym rozpylennyam. Suchasni tekhnolohiyi u promyslovomu vyrobnytstvi: materialy naukovo-tekhnichnoyi konferentsiyi fakulʹtetu tekhnichnykh system ta enerhoefektyvnykh tekhnolohiy, 18–21 kvitnya 2017. Chastyna 1. Sumy: SumDU, 2017. Р. 98–99.

Shayestehaminzadeh S. The properties of TiN ultra-thin films grown on SiO2 substrate by reactive high power impulse magnetron sputtering under various growth angles / S. Shayestehaminzadeh, T. K. Tryggvason, L. Karlsson, S. Olafsson, J. T. Gudmundsson − Thin Solid Films. 2013. Vol. 548. Р. 354–357.

Pogrebnjak A.D., Ivasishin O.M., Beresnev V.M. Arc-Evaporated Nanoscale Multilayer NitrideBased Coatings for Protection Against Wear, Corrosion, and Oxidation. Usp. Fiz. Met. 2016. 17, № 1. Р. 1–28.

Nishat A. Study on Structural, Morphological and Electrical Properties of Sputtered Titanium Nitride Films under Different Argon Gas Flow: materials Chemistry and Physics. 2012. № 134. P. 839–844.

Gago R., Soldera F., Hübner R. X-ray absorption near-edge structure of hexagonal ternary phases in sputter-deposited TiAlN films. Journal of Alloys and Compounds. 2013. Vol. 561. Р. 87–94.

Tribology and Micromechanics of Chromium Nitride Based Multilayer Coatings on Soft and Hard Substrates / Lackner J. M., Waldhauser W., Majo L., Kot M. Coatings. 2014. Nо 4, Р. 121– 138.

Physical characteristics, structure and stress state of vacuum-arc tin coating, deposition on the substrate when applying high-voltage pulse during the deposition / Sobol O. V., Andreev A. A., Grigoriev S. N. et al. Problems of Atomic Science and Technology. 2011. Nо 4 (74), Р. 174S. N.177.

Musil J. Nanocomposit coatings with Enhanced Hardnes.Acta Metallurgica Sinica (English Letters). 2005. Vol. 18, № 3. P. 433–442.

Zhizhchenko A. G. Issledovanie osobennostej strukturoobrazovaniya i napryazhennogo sostoyaniya pokrytij na osnove TiN [Investigation of the features of structure formation and stress state of coatings based on TiN]. Sovremennye metody i tekhnologii sozdaniya i obrabotki materialov [Advanced Methods and Technologies of Materials Development and Processing] − Сollection of scientific papers, Minsk: FTI NAN Belarusi. 2016. Vol. 2. Р. 191–198.

Caicedo J. C. Hard coating performance enhancement by using [Ti/TiN]n, [Zr/ZrN]n and [TiN/ZrN]n multilayer system / J.C. Caicedo, C. Amaya, L. Yate, et al: materials Science and Engineering B. 2010. No 171. С. 56–61.

Structural and mechanical properties of nitrogendeficient cubic Cr–Mo–N and Cr–W–N systems / Zhou L., Klimashin F. F., Holec D., Mayrhofer P. H. Scr. Mater. 2016, 123 Р. 34–37.

Chen J.S., Duh J.G., Wu F. B. Microhardness and Corrosion Behavior in CrN/Electroless Ni/Mild Steel Complex Coating. Surface and Coatings Technology.2002, 150. Р. 239–245.

Influence of roughness of the substrate on the structure and mechanical properties of tialn nanocoating condensed by DCMS / DyadyuraK., Hоvоrun Т. P., Pylypenko O. V., Pererva V. I. NAP 2017, 1 Р. 39–43.

ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА СТРУКТУРНО-ФАЗОВИЙ СТАН ЗНОСОСТІЙКИХ ПОКРИТТІВ НА ОСНОВІ НІТРИДІВ W ТА Cr